Rattle cans, airbrushing, spray varnish, enamel thinners, solvents: The Warhammer hobby exposes your lungs to a surprising range of hazardous particles and chemical fumes, and an open window and even an airbrush extractor unit aren’t enough. A proper respirator mask is one of the most important and most overlooked pieces of kit any miniature painter can own. Here’s what to look for, plus our budget recommendation that covers everything you need for under £40 / 40 € / $40.
What to look for in a respirator mask
The Emperor protects, but not your lungs. It doesn’t matter whether you’re using plastic cement, solvent-based paints, spray primers, or an airbrush: fumes and fine paint particles are everywhere. Even with an open window, in a well-ventilated garage, or out in the open air, you’ll inevitably breathe some of it in. So you should definitely wear proper protection. But not all masks are created equal. Even an FFP2 or KF94 mask offers no protection against chemical fumes. For hobby use, you need a respirator that meets the following criteria:
- Organic vapour filtration (A2): protects against solvent fumes from rattle can spray primers and varnishes, enamel and lacquer paints, thinners, solvents, and similar products
- Particle filtration (P3): protects against fine airborne particles from sanding, priming, airbrushing, and toxic resin dust
- Secure, sealed fit: the respirator must seal properly against your face, otherwise unfiltered air bypasses the filters entirely
The combined filter rating to look for is therefore A2P3.


Our ToP Tip recommendation: 3M 4255+ A2P3


For a budget-friendly entry point that ticks all the boxes, I recommend the 3M 4255+ A2P3. It’s widely available online, fairly comfortable to wear for extended hobby sessions, and covers both particle and organic vapour filtration in a single compact mask. The one trade-off is that the integrated filters aren’t replaceable. Once they’re spent, you buy a new mask. Read the instructions so you know the signs of when the mask is losing its protection. Given the relatively low price, though, that’s a minor compromise for the level of protection you get. If you only wear the mask occasionally for 15 to 30-minute sessions, it should last for a few years.
If you airbrush a lot or work with solvents often, it may be worth stepping up to a 3M half-face respirator with replaceable cartridges for better long-term economy. But for most hobbyists, the 4255+ is an excellent and affordable starting point.
A note for resin 3D printing
If you work with a resin 3D printer, the A2P3 rating is not sufficient on its own. Uncured liquid resin and its fumes contain highly toxic isocyanates and other compounds that require a higher level of chemical protection. For resin printing you need a mask rated A2B2P3 or higher, covering a broader range of organic and inorganic vapours. A dedicated half-face respirator with the appropriate replaceable cartridges is strongly recommended for anyone printing with resin regularly.
Hand on heart: do you own a respirator with the right filter rating, and do you actually use it regularly? If not, skip the next impulse buy for your army and invest in your health instead. If you do, which respirator do you use? Let us know in the comments! For more hobby hacks and advice, browse our ToP Tip category.






Thanks Stahly for your safety reminder!
For those of us in the US (and likely other North American locations) the 3M 4255+ A2P3 does not seem to be available. In fact there are no disposable gas filtering masks available on the 3m website. The relative NIOSH equivalent to the A2P3 would be OV/P100. These run about $40 from Home Depot, and have replaceable filters.
For 3d printing the A2B2P3 is recommended above, and that translates to a NIOSH of OV/AG/P100, which is again available from Home Depot for about $55.
Great post! I would highly recommend a mask with replaceable filters. In addition to producing less waste, you have the option to purchase different filters for different uses. At least for me, the threshold to replace filters vs. entire mask is much lower.
Also, store your mask in a zip-lock bag. It extends the lifetime of the filters and protects the mask from external contaminants.