In this post I’ll show you how to paint Aeldari Webway Gates fast and easy. You’ll learn not only how to paint pale ivory wraithbone with drybrushing, but also how to paint scarlet gems and turquoise energy orbs. Find out more in this tutorial.

This tutorial assumes you have a good understanding of how to paint Warhammer miniatures. Underneath each picture is the corresponding instruction. Each step shows the paint(s) I used. I have a rather eclectic paint collection, so when I use a paint that’s not from Games Workshop or out of production, I’ll try to provide you with suitable alternatives from the current Citadel paint range [in brackets]. However, if you want to achieve the exact same result as shown, you might want to expand your paint collection withthe specific colour. You’ll find a list of all the paints used in this tutorial at the end of the post.

How to paint bone-white Aeldari Webway Gates

This site contains affiliate links you can use to support Tale of Painters. As Amazon Associates, eBay partners, and partners of our partner shops we earn from qualifying purchases. Thanks :)

Prime with Corax White or any other suitable white or light primer, then apply a basecoat of Reaper Master Series Polished Bone [mix of Rakarth Flesh / Pallid Wych Flesh] with an airbrush or large brush.

Apply a wash of Seraphim Sepia directly into the recesses of the model.

Return to your base colour of Reaper Master Series Polished Bone [mix of Rakarth Flesh / Pallid Wych Flesh] and clean up any areas where the wash spilled over.

Drybrush the ivory wraithbone with Pallid Wych Flesh. I prefer to use a large brush with soft, short bristles and a round top, such as The Army Painter’s Masterclass Drybrushes or make-up brushes.

Apply another drybrush of Vallejo Model Color White [White Scar], concentrating on the edges of the wraithbone structure.

Basecoat the brass details, such as the energy projectors, runes, and gem settings, with Vallejo Game Color Brassy Brass [Brass Scorpion].

Wash the brass with Seraphim Sepia.

Edge highlight the brass with Vallejo Mecha Color Light Steel [Stormhost Silver]. You could also use Canoptek Alloy for a more subtle highlight.

How to paint turquoise and magenta gems

Basecoat the energy orbs with Stegadon Scale Green.

Layer the orbs with Vallejo Game Color Falcon Turquoise [or Thousand Sons Blue]. Leave an edge of Stegadon Scale Green where the orbs meet the brass.

Add a couple of layers by mixing successive amounts of Vallejo Model Color White [White Scar] with the Falcon Turquoise, concentrating on the center of the orbs.

Basecoat the gems with Khorne Red.

Shade the upper left corner by applying some thinned Gal Vorbak Red.

Layer with Wazdakka Red. Concentrate on the lower right half and also apply a line of Wazdakka Red around the upper part of the gem.

Layer Pink Horror, concentrating on the lower right half of the gem.

Highlight the lower right corner with Emperor’s Children.

Highlight the lower right corner of the gem with Vallejo Game Color Squid Pink [Fulgrim Pink].

Finally, highlight the lowest right part of the gem with Formula P3 Carnal Pink and also add a small dot of P3 Carnal Pink to the upper left corner of the gem.

And there we have the finished Aeldari Webway Gates, painted in a bone-white paint scheme matching the broken Aeldari masonry on the bases of my Craftworld Iybraesil collection. Check out my showcase post for a cool scenic shot of my Aeldari Webway Gates.

Paints you will need for this tutorial:

If you need to expand your paint collection, check out our 🇬🇧/🇪🇺 partner stores Wayland Games, Element Games, and Firestorm Games, at 🇩🇪 Taschengelddieb and PK-Pro, and at 🇺🇸 Noble Knight Games, which all offer an amazing range of paints and hobby products at a discount. Using our links helps to support Tale of Painters at no additional cost to you, so thank you very much for using them!

Update 2026: how to add extra shading to your Webway Gate

When I wanted to expand my Aeldari terrain collection in 2026 (see here), I decided to give the Webway Gates even more shading. I carefully masked off all the details that weren’t stone with putty and liquid mask, then sprayed additional shading from below with WPA Viper Brown and Seraphim Sepia. I drybrushed again with RMS Polished Bone and VGC Dead White to bring out the edges, applied Abteilung 502 Vietnam Earth pigment, and sprayed the lower edges with thinned Speedpaint Noble Skin. You can see the result here:

Aeldari Webway Gates painted by Stahly in a sandstone colour scheme, on a white background
The updated Webway Gates

If you want to paint your Webway Gates like this too, it makes sense to spray the shading on right at the start so you don’t have to mask off the details later. To do this, replace Step 1 in the tutorial with an airbrushed basecoat of Warpaints Air Viper Brown, and then spray Reaper Master Series Polished Bone zenithally from above. Then you can spray on extra shading with Seraphim Sepia before moving on to Step 2 in the tutorial and washing the recesses with Seraphim Sepia. I’d recommend adding the Vietnam Earth pigment at the end, after spraying the lower edges with SP Noble Skin.

Hope you enjoyed this tutorial. If so, leave a comment or reaction below, and if you got any questions, leave them here so I can answer them for you.