In this tutorial you’ll learn how to paint muzzle-flash effect pieces for bolters or similar weaponry in a bright, cinematic way. Find out more in this post.

This site contains affiliate links you can use to support Tale of Painters. As Amazon Associates, eBay partners, and partners of our partner shops we earn from qualifying purchases. Thanks :)

Tutorial: How to paint cinematic muzzle-flashes - featured image

This tutorial assumes you have a good understanding of how to paint Warhammer miniatures. Underneath each picture is the corresponding instruction. Each step shows the paint(s) I used. I have a rather eclectic paint collection, so when I use a paint that’s not from Games Workshop or out of production, I’ll try to provide you with suitable alternatives from the current Citadel paint range [in brackets]. However, if you want to achieve the exact same result as shown, you might want to expand your paint collection with the specific colour. You’ll find a list of all the paints used in this tutorial at the end of the post.

The effect pieces painted for this tutorial are from Tablehammer.com, check out our review here. There are other companies out there who also do cinematic effect pieces, for example, Anvil Industries or Armorcast.

How to paint muzzle-flashes

Tutorial: How to paint cinematic muzzle-flashes - step 1

Basecoat the effect piece with Wraithbone primer (if you paint it separately) or a few thin coats of Wraithbone base paint.

Tutorial: How to paint cinematic muzzle-flashes - step 2

Mix Vallejo Model Color White [or White Scar or any white you prefer] with Lahmian Medium about 1:2 to create a wash and apply it all over the muzzle-flash.

Tutorial: How to paint cinematic muzzle-flashes - step 3

Once dry, layer Moon Dust [or Phalanx Yellow or Flash Gitz Yellow with a little bit of White Scar added] on the muzzle-flash, leaving the white wash showing through in the recessed areas.

Stahly Patreon Banner 2024 760x100px
Tutorial: How to paint cinematic muzzle-flashes - step 4

Highlight the most prominent features with Yriel Yellow, which starts to create a gradient from light to dark.

Tutorial: How to paint cinematic muzzle-flashes - step 5

Complete the effect by highlighting only the tips with Vallejo Game Color Orange Fire [or Fire Dragon Bright].

And there we have the finished muzzle-flash. I went for a very bright look, though with using the technique above, it’s easy to paint a darker flash if you prefer. Start with a basecoat of Yriel Yellow for step 1, create a wash with Dorn Yellow and Lahmian Medium for step 2, layer with Fire Dragon Bright in step 3, highlight with Wild Rider Red for step 4, and finally Mephiston Red for step 5.

Silver Skulls Reiver with muzzle-flash effect piece

Paints you will need for this tutorial:

Citadel (Games Workshop)
Wraithbone Spray / Base paint
Yriel Yellow
Lahmian Medium


If you need to expand your paint collection to follow the tutorial, check out our partner stores Wayland Games and Element Games, which offer an amazing range of paints at a discount.

Hope you enjoyed this tutorial. If so, leave a comment or reaction below, and if you got any questions, leave them here so I can answer them for you.

6
0
0
0
0
0